[kernel] sch-i535 (s3 verizon) rooted insecure kernels - important info!
Hi Guys,
Verizon model is protected from flashing unsigned/modified boot.img and recovery.img. Which means there is no known root method as for now for SCH-I535.
Stay tuned for more informations as we are doing research now.
well brother, i have already run out of thanks for the day, but thanks
have you seen any flash failures in Odin on the GSIII due to battery being in or out? With the Charge you had to have the battery out while entering download mode, then immediately place battery in before flashing or it would fail everytime.
Also, how exactly do you enter download mode for the new guys?
I am going to have to ask again.....what exactly is the process of entering download mode? Do you have to pull and replace the battery at any point in order to avoid failed flashes?
Updating for GSIII
Turn off phone
connect USB cable from PC to phone while holding down volume down button, home button and power button simultaneously until android logo appears
press volume up button
see that Odin detected and connected to the device
I was unable to get the phone into download mode without the battery in. I tried volume down/power as well as volume down/home/power while plugging in the usb cable. All I ever got was a single vibration but no warning triangle.
I was unable to get the phone into download mode without the battery in. I tried volume down/power as well as volume down/home/power while plugging in the usb cable. All I ever got was a single vibration but no warning triangle.
well my description above was based on a previous handset.....so not surprised
I got into Odin download mode by holding volume down, home and power. I had to do it about 3 times before I got it right. However, that was for another purpose, and I have NOT tried to flash this image.
well brother, i have already run out of thanks for the day, but thanks
have you seen any flash failures in Odin on the GSIII due to battery being in or out? With the Charge you had to have the battery out while entering download mode, then immediately place battery in before flashing or it would fail everytime.
Also, how exactly do you enter download mode for the new guys?
fails here...
same hear,
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
fail
suggestions?
Everyone is using the latest Odin provided correct?
Same as the last two posts. Failed twice.
correct, and teh phone is telling me secure check fail ; boot
I am going to have to ask again.....what exactly is the process of entering download mode? Do you have to pull and replace the battery at any point in order to avoid failed flashes?
Updating for GSIII
I was unable to get the phone into download mode without the battery in. I tried volume down/power as well as volume down/home/power while plugging in the usb cable. All I ever got was a single vibration but no warning triangle.
well my description above was based on a previous handset.....so not surprised
I got into Odin download mode by holding volume down, home and power. I had to do it about 3 times before I got it right. However, that was for another purpose, and I have NOT tried to flash this image.
Sent from my SCH-I535 using Tapatalk 2